AXB-regulating frequency of hydraulic hammer

       As the main power source of excavator or loader, hydraulic hammer plays an important role in the working process. In order to improve work efficiency, we can regulate the frequency of hammer as per actual work at any time. Many people do not know how to regulate the frequency of hammer, the following are some methods shared by AXB Technology Co.,Ltd.

       Its basic principle is to adjust the frequency of hammer by changing the piston stroke or power source. At the same time, keep the working pressure and hydraulic oil unchanged, the most important is the installation position of the regulator is on the right side of the hammer. 

       There is an adjusting screw right above or on the side of the cylinder, the function is to adjust the striking frequency of the hammer. We can remove the screw nut of regulator,and then turn the adjusting screw to the end, its strike frequency is relatively low. If the adjusting screw is rotated outward for 2 cycles, its strike frequency is relatively high. 

       The above are some methods summarized by AXB Technology Co.,Ltd. In a real-life situation, we can adjust the frequency according to actual use. The proper striking frequency is also the premise to keep the hammer working steadily.